Skip to content
Amigari Downs Lock ExpertsRequest a visit
Open 24/7(365) 607-0483Call now
Person holding a long metal door-hardware assembly beside a cart of similar parts and a glass door fitted with a push bar. — Panic & Exit Hardware, Crescent Park

Plan ahead Commercial · Crescent Park

Panic & Exit Hardware in Crescent Park

A padlock went on the stockroom's back door years ago for security and nobody has thought about it since, until the walkthrough this week pointed out that the same door is the room's only other way out.

Call now · open 24/7(365) 607-0483

Request a visit

In plain words

The visit ends with a record, not just a working door. Every device fitted is logged with its type, its rating, the force and latch checks it passed, and who now holds the dogging key. That record is what a fire inspector, an insurer or a new property manager asks for later, and it is far easier to hand over on the day of installation than to reconstruct afterward from memory of what went on which door.

Sound familiar?

Two doors used to swing as a pair at the community hall entrance, but one leaf has started closing before the other, catching the astragal and leaving a gap wide enough to worry the caretaker.

How the visit goes

Panic & Exit Hardware · Crescent Park

How the visit goes

Illustrative locksmith scene — Crescent Park
  1. 1

    Confirming why the door needs this hardware

    The visit starts with the reason exit hardware is being discussed at all: an occupant load that has crossed a threshold, a fire inspector's note, a new use for the room, or an existing device that has stopped working the way it should. Confirming this first decides everything downstream, because a door required to have a releasing device is treated differently from one where an owner simply wants easier egress. Whoever is responsible for the building is asked directly what triggered the visit, and the answer is recorded alongside the door it concerns before any hardware is chosen.

  2. 2

    Adding electrified functions

    Where the plan includes access control or an alarm, the wiring is run and terminated to the device without touching its mechanical exit function: a request-to-exit switch reports that the pushpad or crossbar was actuated, electric latch retraction lets an authorized signal release the latch for entry, and an alarm module sounds locally when the crossbar is used. On a fire-rated opening, electric latch retraction is arranged to relatch automatically the instant a fire-alarm signal comes in, since a fire door has to keep its active latch and cannot rely on a mechanical dogging function to do that.

  3. 3

    A maintenance rhythm worth keeping

    Exit devices are mechanical hardware and benefit from the same light attention as any other: a periodic check that the release force has not crept up, that the latch still seats fully, and that nothing has been added to the door that would block its exit function. Fire door assemblies carry their own inspection and testing rhythm, and folding the exit hardware into that same routine check keeps the whole opening, not just the lock, in the condition it was fitted in.

In the van

  • Astragal and mullion hardware
  • Dogging key or keyed cylinder
  • Outside trim (pull, lever or cylinder)
  • Through-fixings and mounting hardware
  • Door closer

What affects the quote

  1. 1

    Electrified functions added

    A request-to-exit switch or electric latch retraction adds wiring, a power source and coordination with the building's other systems, while a standalone alarm module can run on its own battery; each is priced alongside the mechanical installation itself.

  2. 2

    Single door or a pair

    A pair of doors that needs ordered closing calls for a coordinator or an astragal, and one being converted into a single wide exit needs a mullion removed and replaced with vertical-rod devices on each leaf, both of which add work beyond a single-door installation.

  3. 3

    Occupancy and code documentation needed

    A project with a fire inspector's note or a building official's requirement attached usually needs a more detailed written record than a straightforward upgrade an owner requests on their own initiative.

Same fees day, night or weekend.

Have it ready

Before you call · 0 / 3

(365) 607-0483

Panic & Exit Hardware: questions

Advice · (365) 607-0483

What does the finished installation actually prove to an inspector?

It proves that a specific device, rated for the opening it sits on, releases under an appropriate force, latches fully, and has been tested and recorded on a given date. The record travels with the building, so a fire inspector reviewing the space later is looking at a documented history of that exit rather than testing hardware with no known installation date or specification.

Can I add a request-to-exit switch for my access-control system?

Yes. A request-to-exit switch is wired to signal the access-control panel that the pushpad or crossbar was actuated. Telling that apart from a forced or propped door usually means pairing it with a door-position contact and the panel's own logic, since the switch on its own only reports that the hardware was used. It sits alongside the mechanical device without changing how the crossbar or touchpad works, so the door still releases under a push even if the access-control system loses power.

Can a padlock or extra deadbolt stay on a door that has this hardware?

No additional fastening should stay on an exit door that does not release the same way the primary device does. A hasp, padlock or separate deadbolt added at some point for extra security is a common finding on an older door, and removing or replacing it with something that releases under the same push is part of bringing that opening back to a single, reliable exit.

Niagara, Ontario

Crescent Park information

Town
Crescent Park, Niagara, Ontario
In business
26 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

62%

Older homes. About 62% of homes in Fort Erie were built in 1980 or earlier, according to the 2021 Census.

Decades of seasons move a frame, and an older house often has a front door that locks easily in summer and fights in winter. Setting the strike with the seasons in mind, and choosing a lubricant that stays fluid in the cold, keeps it working year round.

83%

Mostly houses. Single-detached houses make up about 83% of homes in Fort Erie (2021 Census).

A detached house gives a locksmith room to work: full access to both sides of every door, hinges and frames included. Repairs and upgrades can be thorough, from the front deadbolt to the gate latch, with nothing off limits.

Source: Statistics Canada, 2021 Census of Population

Open Crescent Park in Google Maps

Open 24/7

Request a visit

A padlock went on the stockroom's back door years ago for security and nobody has thought about it since, until the walkthrough this week pointed out that the same door is the room's only other way…

Call now · open 24/7(365) 607-0483
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 26 years in business