Change or rekey · Edgewood Park
Smart Lock Installation in Edgewood Park
You have just taken possession of the house and the previous owners handed over a keypad deadbolt with a code nobody wrote down and an app account you cannot get into. It needs to become yours, properly, or be replaced.
Call now · open 24/7(365) 607-0483In plain words
Our winters shape how a smart lock should be fitted. Cold drains batteries sooner, so the locksmith fits the maker's specified battery type, sets the low-battery alert to reach a checked phone, and shows how a fresh set goes in with gloves on. Meltwater that refreezes overnight can bind a bolt, so the strike is set to give the motor clearance. A storm door that traps summer heat, or a keypad facing driving snow, steers the choice of model and finish. Fitted this way, a smart lock is set up to perform through the cold months, even though batteries and materials still work harder in deep winter than in June.
How the visit goesYour mother still lives on her own, and the personal support worker, the pharmacy delivery and two siblings all need to get in on different days. Cutting keys for everyone feels wrong; a code for each person, with a log, feels right.
Smart Lock Installation · Edgewood Park
How the visit goes
- 1
Who controls the door
A smart lock hands out access, so the visit begins by confirming who is entitled to grant it. For an owner that is photo identification and a link to the address; for a tenant it also means the landlord has agreed to the change, since in a rental both parties need a working way in. Where a property manager or a family member is arranging the work on someone else's behalf, the locksmith asks for that person's go-ahead as well. When a used smart lock is being taken over, the check extends to the account behind it, which must be released by whoever set it up. Ten minutes of paperwork here keeps everyone's access legitimate.
- 2
Rekeying the override so the old key retires
Most keypad deadbolts keep a small conventional backup cylinder, and leaving it on the old key would undo half the point of the upgrade. The locksmith removes it, slides the plug out with a follower, repins it to a fresh combination, then cuts and tests new keys. Where the household wants one key for everything and the cylinders share a compatible keyway, the back and side doors are rekeyed to the same combination so a single key runs the override and the mechanical locks alike. Some makers reset the cylinder with a tool and the new key rather than by repinning; the method changes, the outcome is the same. The old key no longer opens any cylinder that was rekeyed.
- 3
The override key has a home
With codes doing the daily work, the mechanical key is easy to forget, and forgetting where it lives is how a dead battery turns into a lockout. On a keyed model, the locksmith hands you the new keys for the rekeyed override cylinder before leaving, and talks through where they should stay: one on a keyring that leaves the house, one with a trusted neighbour or in a combination lockbox fixed somewhere discreet. Try that key in the lock every few months so the cylinder stays free and you know it still turns. If other doors were rekeyed to match, the same key now runs the whole house, and the previous keys can go in the recycling.
In the van
- Dry PTFE lubricant
- Adjustable-backset bolt and faceplate
- Hole saw, spade bit and drilling jig
- Hand screwdrivers, Phillips and Torx
- Mechanical override cylinder and repinning kit
What affects the quote
- 1
Number of users and codes to program
Setting up two codes for a couple is different from configuring a household of six plus a cleaner's schedule and a landlord's master. The count of codes and schedules is a fair part of the labour.
- 2
Rekeying the override cylinder and other locks
Repinning the smart lock's backup cylinder to a new key, cutting the keys and bringing the remaining mechanical locks onto the same key are each counted per cylinder and per key.
- 3
Removing an old mortise or non-standard lock
Older doors sometimes carry a mortise case or a lock with an unusual footprint. Filling the pocket, plugging holes and re-drilling to the standard preparation is careful joinery, and it is quoted as preparation.
Same fees day, night or weekend.
Smart Lock Installation: questions
How long does a smart lock installation take?
Plan on part of a morning or afternoon for one door. A straightforward swap onto a well-fitting door with the standard holes is the shorter end; a door that needs alignment work, holes enlarged or a mortise pocket filled takes longer, as does joining the lock to Wi-Fi and setting up several user codes. If other doors are being rekeyed to match the override key, add time for each cylinder.
Do I need a hub or a bridge?
Only if the model you choose uses one to reach the internet. Some locks have Wi-Fi built into the interior unit and connect straight to your router. Others save battery by using Bluetooth at the door and a small plug-in bridge nearby to relay to the network. Locks designed for a home hub join whatever hub you already run. The locksmith checks signal strength at the door itself and recommends the arrangement that keeps the lock reliably connected.
Can the back door and garage door be put on the same system?
Yes, in one of two ways. Each door can get its own smart lock, all managed from the same app and account, with the same codes working at every door. Or, where the cylinders share a compatible keyway, the other doors can stay mechanical and be rekeyed so a single key operates them and the smart lock's override cylinder alike. Many households do the front door first and add the others later; the account and the codes carry across.
Niagara, Ontario
Edgewood Park information
- Town
- Edgewood Park, Niagara, Ontario
- In business
- 26 years
- Hours
- Open 24/7 · nights, weekends and holidays, same fees
- Phone
- (365) 607-0483
- Visits
- On-site assessment preferred. Request a visit or call.
What the census means at the door
62%
Older homes. About 62% of homes in Fort Erie were built in 1980 or earlier, according to the 2021 Census.
Basement and side entries on older homes were often fitted long after the house was built, with whatever lock was on hand. Bringing those doors up to the standard of the front entry, and onto the same key, is a common and satisfying job.
83%
Mostly houses. Single-detached houses make up about 83% of homes in Fort Erie (2021 Census).
Where most homes are detached houses, each one has several exterior doors: front, side, back, garage entry, sometimes a walkout. Getting them all onto one key is the most requested job, and it usually takes a single visit.
Nearby
Open 24/7
Request a visit
You have just taken possession of the house and the previous owners handed over a keypad deadbolt with a code nobody wrote down and an app account you cannot get into.
Call now · open 24/7(365) 607-0483- On-site assessment preferred
- Same fees day, night or weekend
- 26 years in business