Skip to content
Amigari Downs Lock ExpertsRequest a visit
Open 24/7(365) 607-0483Call now
A silver-colored deadbolt set in clear packaging with two keys resting on the countertop in front. — Lock Rekeying, Fort Erie

Change or rekey · Fort Erie

Lock Rekeying

Your basement tenant has given notice, and a new one arrives on the first. The lock on the separate entrance works perfectly well.

Call now · open 24/7(365) 607-0483

Request a visit

In plain words

Rekeying is a change made inside the lock rather than to the lock itself. Many keyed cylinders hold a row of small pins that have to sit at exactly the right heights before the plug will turn, set by the cuts on your key, though some residential cylinders use a side-locking bar instead of pins. A locksmith slides the plug out, removes the pins, and loads a new set matched to a freshly cut key. Reassembled, the lock looks and feels exactly as it did, except that the new key turns it and every key cut before today does not. Your hardware, finish and door stay as they were.

Sound familiar?

One key for the front door, another for the back, a third for the side door into the garage, and a fourth for the shed. You stand on the step every evening flipping through them in the dark, trying each one until something turns.

How the visit goes

Lock Rekeying · Fort Erie

How the visit goes

Illustrative locksmith scene; not an actual job
  1. 1

    Who is entitled to change the locks

    Rekeying decides who can enter a home, so the first check is about the person asking. A homeowner shows photo identification and something tying them to the property, such as a tax bill, a closing document or a utility statement. A property manager brings authorization from the owner. A tenant is asked whether the landlord has agreed to the change and will receive a copy of the new key, because tenancy rules here expect both sides to hold one. Where a unit is in a condominium, the locksmith asks whether the building has a rule about suite-door locks. None of this is an obstacle; it is the part of the job that protects the home being worked on.

  2. 2

    Sliding the plug and changing the pins

    With the cylinder in hand, the locksmith removes the cam or tailpiece from the back, inserts the existing key and turns the plug slightly so the top pins clear, then pushes a plug follower in behind the plug as it slides out. The follower holds the top pins and springs in the housing so nothing springs loose. The plug now sits on the bench with its row of bottom pins exposed, and those pins are tipped out. This is the heart of rekeying a pin-tumbler cylinder: the pins that decided which key worked are gone, and the plug is ready to receive a set that matches a key nobody has ever carried.

  3. 3

    A written note of what was done

    A short record closes the job: which doors were rekeyed, whether any cylinder was replaced, how many keys were issued and to whom, and any door that was deliberately kept on its own key. For a homeowner it is a line in the house file that answers the question, years from now, of which key opens what. For a landlord it is the handover to give the incoming tenant and to keep for the next turnover. For a property manager it is the start of a proper keying chart. It also makes any later work simpler, since the next locksmith can see what system the house is on.

In the van

  • Replacement cylinder for odd keyways
  • Key blanks
  • Key gauge
  • Pinning tweezers and tray
  • Dry graphite or PTFE lubricant

What affects the quote

  1. 1

    Upgrades chosen during the visit

    Some people take the opportunity to replace a double-cylinder deadbolt with a thumb-turn model, add a reinforced strike or move to a heavier deadbolt. None of it is needed to rekey; each is a separate line.

  2. 2

    Access to each door being rekeyed

    A rekeying visit goes smoothly when every door is reachable without delay: an empty unit, a cleared hallway, or someone available to let the locksmith into each room. Locked common areas, tenants who are out, or furniture blocking a cylinder all add time the locksmith accounts for on site.

  3. 3

    Smart lock override cylinders and codes

    Pinning the backup cylinder of a keypad or app lock to the house key is a small extra task, and reviewing or deleting user codes at the same time is another, each named in the quote.

Same fees day, night or weekend.

Have it ready

Before you call · 0 / 3

(365) 607-0483

Lock Rekeying: questions

Advice · (365) 607-0483

My keys were lost with something showing my address. Is rekeying enough?

Rekeying is exactly the right response, because it makes the lost key useless at every door that was pinned. The locksmith will walk the property with you to be sure nothing is missed, including the garage side door, a shed and any padlock the same key opened, and will suggest changing any garage keypad code that was written on the same ring. After that, whoever finds the keys is holding brass that opens nothing on your property.

One of my locks is stiff and worn. Can it still be rekeyed?

Often the stiffness is grit, old oil and tired springs rather than real wear, and those are handled while the cylinder is on the bench: the plug is cleaned, new springs go in with the new pins, and a dry lubricant finishes it. If the plug has worn oval or the housing is damaged, the locksmith shows you and suggests a replacement cylinder pinned to the same key, rather than fresh pins in a lock that will keep dragging.

My deadbolt says I can rekey it myself with a little tool. Should I?

You can, given a key that currently operates the lock, the maker's reset tool, the new key and the steps followed in order. Trouble tends to arrive when the old key is missing, when the new key belongs to a different keyway, or when a reset stalls halfway and the cylinder then accepts neither key. A locksmith carries the tool and the procedure, can check that the new key suits the rest of your doors, and can fit a standard cylinder if a forced reset has broken the mechanism.

Niagara, Ontario

Fort Erie information

Town
Fort Erie, Niagara, Ontario
In business
26 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

62%

Older homes. About 62% of homes in Fort Erie were built in 1980 or earlier, according to the 2021 Census.

Decades of seasons move a frame, and an older house often has a front door that locks easily in summer and fights in winter. Setting the strike with the seasons in mind, and choosing a lubricant that stays fluid in the cold, keeps it working year round.

83%

Mostly houses. Single-detached houses make up about 83% of homes in Fort Erie (2021 Census).

A detached house gives a locksmith room to work: full access to both sides of every door, hinges and frames included. Repairs and upgrades can be thorough, from the front deadbolt to the gate latch, with nothing off limits.

Source: Statistics Canada, 2021 Census of Population

Open Fort Erie in Google Maps

Open 24/7

Request a visit

Your basement tenant has given notice, and a new one arrives on the first.

Call now · open 24/7(365) 607-0483
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 26 years in business